How do we think the story will end?

2021.10.24 18:27 Grand_Entertainer_83 How do we think the story will end?

Since we are nearing endgame of the manga, and it seems like takemitchy hasn’t really had any success, are we going to get an unhappy ending? Is he really going to be able to fix everything by the end? Takemitchy has made many declarations, he swore to bring baji and emma back and he said he would be the top of toman so will those things really happen? I’m starting to foresee a kind of “don’t try to change the future because it will end up worse” ending
submitted by Grand_Entertainer_83 to TokyoRevengers [link] [comments]


2021.10.24 18:27 Interesting-Price-73 Inventory reports Help

Are we supposed to perpetual adjust all inventory that is off on the big report?
submitted by Interesting-Price-73 to sherwinwilliams [link] [comments]


2021.10.24 18:27 logicalcelestial Introducing a new yearly tradition that you’re ALL invited to participate in: Ween November!

Starting as a yearly challenge among my closest friends, I will now invite you all to participate in what I hope will become a yearly tradition!
Ween November consists of one thing and one thing only: Ween! That’s right, for the whole month of November you listen to nothing but Ween, no other music until 12/01. It’s a special time to reconnect with our favorite band (alongside Boognish of course), have discussions about Ween with our fellow mangs, and prove our dedication to Ween!
In years past, I’ve found it to be very fun and verybrown, so Ween, join me this year in Ween November!
Praise Boognish and stay brown,
-logicalcelestial
submitted by logicalcelestial to ween [link] [comments]


2021.10.24 18:27 VHorowitz Stella's Levain Style Cookies 😍

submitted by VHorowitz to seriouseats [link] [comments]


2021.10.24 18:27 LiftUpABanner Are You Being Fed By Bread Alone? Beware The Tables You Choose To Eat From - Life By EVERY Word Of God

Are You Being Fed By Bread Alone? Beware The Tables You Choose To Eat From - Life By EVERY Word Of God submitted by LiftUpABanner to JesusChrist [link] [comments]


2021.10.24 18:27 The_Player_100 [OoT]Unpopular Opinion: The Water Temple isn’t that bad actually

I’m playing OoT for the first time and was dreading the water temple but I was in and out of the water temple quite quickly, I got everything, was very rarely really confused and somewhat enjoyed the Switching water levels dynamic. The truly bad temple for me was the Shadow temple, that sucked mostly just cause the room with the massive pits throughout the dungeon that took you right back to the beginning of the dungeon so you have to trek through the whole dungeon again just to fall again and be sent back to the start again, they were so annoying.
submitted by The_Player_100 to zelda [link] [comments]


2021.10.24 18:27 Weeleelaloo [OC] A Batman sketch. Feedback is much appreciated if given.

[OC] A Batman sketch. Feedback is much appreciated if given. submitted by Weeleelaloo to comicbookart [link] [comments]


2021.10.24 18:27 TimePersonality6214 The human race deserves better than this from its business ‘leaders’

The human race deserves better than this from its business ‘leaders’ submitted by TimePersonality6214 to antiwork [link] [comments]


2021.10.24 18:27 Cryptoliciousdreams Dropped first batch of Cryptopolis (took hours, link in comment)

Dropped first batch of Cryptopolis (took hours, link in comment) submitted by Cryptoliciousdreams to NFTcollection [link] [comments]


2021.10.24 18:27 Solo761 Proxima 6.0 plate adhesion problem

This surely isn't first post with this topic, but I'm at my wits end...
Last week I got Proxima 6.0. This is my second resin printer. I also have OG Anycubic Photon and have no issues with it (except speed). First I tried to print resin exposure plate (after I leveled the plate of course, 4 bottom layers, 30 seconds exposure, 3,5 seconds for the rest) and it succeeded. Next I tried to print one simple figure and nothing was on the build plate. It was stuck on FEP.
Resin is Anycubic Gray, from same bottle I use on my Photon. I've spent whole weekend trying to print something, cleaning the vat, build plate and releveling without results.

I've read here that some recommend sanding the plate because it's not flat. I've checked for flatness diagonally and yes, on corners it sits on the ruler (actually square angle tool, it's metal and straight) but in the middle I can see the gap. So I stuck 400 grit sand paper to glass plate I had and started to slowly grind for about an hour. Here's the result
https://imgur.com/a/USDCd6L
Corners were sanded down, middle of the plate still has anodized layer, when I check it with ruler there still some light between but it's uniform. I guess anodized particles make the surface rough so it can't close it completely.
But again, no result, print doesn't stick, tried again with "tight" and "loose" Z=0, 30 seconds for base layers and 45 seconds for base layers. It simply doesn't stick to build plate.
Any advice? Should I simply continue with sanding? Maybe with higher grit sandpaper to remove anodizing completely?
submitted by Solo761 to Voxelab_Proxima [link] [comments]


2021.10.24 18:27 Lord_of_Cones Merlin welcomes you back to his snuggle den.

Merlin welcomes you back to his snuggle den. submitted by Lord_of_Cones to Chonkers [link] [comments]


2021.10.24 18:27 DankuBot Whose gonna win the race?

submitted by DankuBot to dankmemesdaily [link] [comments]


2021.10.24 18:27 escape00000 Cursed Duet

Cursed Duet submitted by escape00000 to cursedcomments [link] [comments]


2021.10.24 18:27 PeskyDiorite Any international universities in Norway that give scholarships?

.
submitted by PeskyDiorite to ApplyingToCollege [link] [comments]


2021.10.24 18:27 Just-turnings Suggestions for a water bowl? See comments

Suggestions for a water bowl? See comments submitted by Just-turnings to goldenretrievers [link] [comments]


2021.10.24 18:27 hexagon33 Coke, MDMA, and Psilocybin. Dead?

submitted by hexagon33 to cocaine [link] [comments]


2021.10.24 18:27 Echo8me Recipe Advice: How strong of a flavour are cranberries after fermentation?

Hi guys, I'm getting married next year and my fiancée has requested orange-cranberry for the reception. I've never done mixed-fruit and I've never used cranberries before, so I'm wondering how much flavour you get out of them? I'm aiming for orange with a touch of cranberry, without the cranberry being either over-powering or lost behind the orange. The recipe is a bit of a work in progress, but is based off a successful orange mead I did few years back. Consider anything in [ ] brackets to be an "ish", dependent on the advice I get from you guys. Open to any other criticisms or advice too!
To ask the question directly, based on the flavour profile above, how much cranberry should I add to this recipe? Is there any advice on mixed-fruit balancing?

Recipe:
Lalvin D47 (Double-shot due to issues I've read about cranberry inhibiting fermentation, rehydrated, goferm, etc.)
[2] kg of oranges, zested, peeled, pithed, frozen overnight, thawed, smashed, in a bag with cranberries
Above mentioned orange zest
[X] kg of fresh cranberries, frozen overnight, thawed, smashed, in a bag with oranges
[8.9] kg of wildflower honey(aiming for SG of 1.107 OR [7] kg aiming for SG of 1.085, undecided
Water to take must to 26 L, excluding fruit
Chemistry as needed (pH, pectic, tannins, etc.)
Back-sweetened to taste
submitted by Echo8me to mead [link] [comments]


2021.10.24 18:27 SlickDevilClub Launch Details - Follow Slick Devil Club

Launch Details - Follow Slick Devil Club submitted by SlickDevilClub to NFTsMarketplace [link] [comments]


2021.10.24 18:27 MachuPichu10 This brings me such glee

This brings me such glee submitted by MachuPichu10 to antiwork [link] [comments]


2021.10.24 18:27 Funny-Journalist5948 Everything I’ve been able to get so far. Started collecting about 3 months ago

Everything I’ve been able to get so far. Started collecting about 3 months ago submitted by Funny-Journalist5948 to MarvelLegends [link] [comments]


2021.10.24 18:27 adjustmentVIII 2021 Oct. 23: Monarch

2021 Oct. 23: Monarch submitted by adjustmentVIII to Journaling [link] [comments]


2021.10.24 18:27 AnonyMuzlim Least hypocritical "Muslim" leader

Least hypocritical submitted by AnonyMuzlim to 2islamist4you [link] [comments]


2021.10.24 18:27 Gullible_Western7147 This time without translation, City of Secrets American SNES bootleg. Explanation is still in the comments, though...

This time without translation, City of Secrets American SNES bootleg. Explanation is still in the comments, though... submitted by Gullible_Western7147 to bootleggameovers [link] [comments]


2021.10.24 18:27 CH24steady 💥Apollo Sale💥Great price to grow your Staking Bag💰. I’ve received $43 in a few days of Staking 💎🙌🚀

💥Apollo Sale💥Great price to grow your Staking Bag💰. I’ve received $43 in a few days of Staking 💎🙌🚀 submitted by CH24steady to ApolloOfficial [link] [comments]


2021.10.24 18:27 AdministrationAny425 NNN is coming, but please see this video it may change your vision: https://www.youtube.com/watch?v=7RF9m5fksbg

submitted by AdministrationAny425 to nonutnovember [link] [comments]


http://fly-stand.ru